Encoding RDP: What It Is and How to Encode Video on One
An Encoding RDP is a remote Windows desktop where video encoding is allowed. How encoding works, how to run a job from upload to download, and which settings matter.
3 min readBy Daniel
Reviewed by the AmazingRDP technical team

See our Encoding RDP plans: encoding software installed and unlimited bandwidth. See Encoding RDP from $12.99
Encoding a video means converting it into another format, size or quality: a camera file into a small MP4, a recording into several resolutions for streaming, an old collection into a newer codec. It is one of the heaviest jobs a computer does. An encode can hold every processor core at full load for hours. An Encoding RDP is a remote Windows desktop meant for exactly that, so that your own computer stays free.
Why a special plan?
On an ordinary shared RDP, many people use one server, and each may use only a fair share of its processor. An encoder takes all it can get, so ordinary shared plans do not allow it. An Encoding RDP runs on servers set aside for encoding, where full processor use is the purpose of the plan. Two more things help:
- The line. Video files are large. A datacentre connection uploads and downloads them far faster than most home lines.
- It keeps running. You can disconnect, switch your PC off, and collect the result later.
How encoding works, in short
| Term | Meaning |
|---|---|
| Codec | The compression method: H.264 plays everywhere; H.265 (HEVC) and AV1 make smaller files and take longer |
| Container | The file type that holds video and sound: MP4, MKV |
| Bitrate or quality (CRF) | How much data per second. A quality setting gives even quality; a fixed bitrate gives a predictable size |
| Preset | Speed against size: slower presets make smaller files at the same quality |
| Software or hardware encoding | The processor gives the best quality per megabyte; a graphics card is much faster |
A job from start to finish
- Connect to the desktop with Remote Desktop. See how to connect to RDP from a desktop.
- Bring the source file. Download it on the server from where it is stored (cloud storage, a download link); that uses the fast line. For a file on your PC, copy it through the Remote Desktop drive sharing.
- Open the encoder. Our Encoding RDP plans come with encoding software installed. HandBrake is a common free one.
- Choose the settings (next section) and the output folder.
- Start the job. Close the Remote Desktop window with the X; do not sign out, or the program ends.
- Collect the result. Upload it from the server to your storage, or copy it to your PC.
- Clean up. Delete source and result when you are done; disk space on the plan is limited.
Settings that matter
In HandBrake, start from a preset such as "Fast 1080p30" and change only what you need:
- Codec: H.264 if the file must play on anything; H.265 to save space.
- Quality: the "Constant Quality" slider. For H.264, 20 to 23 is a good range; lower numbers mean better quality and bigger files.
- Encoder preset: "Medium" or "Slow". "Very slow" takes much longer for a small gain.
- Resolution: do not scale up. Scaling down is where most of the size saving comes from.
- Audio: AAC at 128 to 160 kbit/s for stereo is plenty.
For many files, use HandBrake's queue, or FFmpeg in a script: see installing and using FFmpeg in Python.
How many cores do you need?
An encoder splits its work across cores. One video at a time runs well on four to eight. Several jobs side by side, or long 4K files, are where 24 or 32 cores pay off. On our site that is the difference between Encoding RDP and Extreme Encoding RDP.
What these plans are not
- They are shared desktops without administrator rights, so you use the installed software and cannot install your own. If you need your own tools, choose a dedicated server.
- They are for encoding files, not for live streaming. For that, see how to keep OBS streaming after closing RDP and our Streaming RDP plans.
- Our usage policy applies: encode material you have the right to use.
Questions
What is an Encoding RDP?
A remote Windows desktop on servers set aside for video encoding, where using the full processor is allowed.
Can I encode video on a normal RDP?
Not on ordinary shared plans. Encoding uses the whole processor, which is why it has its own plans.
Which software is used for encoding?
HandBrake and FFmpeg are the common free tools. Our Encoding RDP plans come with encoding software installed.
Does the encode continue when I disconnect?
Yes, if you close the Remote Desktop window without signing out.